Printing results are not satisfactory, Smudge marks appear on the, Bottom edge of printouts(p. 603) – Canon imageCLASS D1650 All-in-One Monochrome Laser Printer User Manual
Page 611: Smudges appear on, Printouts(p. 603), Smudges appear on printouts
Printing Results Are Not Satisfactory
3JX3-0AA
Dirt inside the machine may affect printing results. Perform care and cleaning to the machine first. Regular
Smudge Marks Appear on the Bottom Edge of Printouts
Are you using appropriate paper?
●
Check the supported paper types and replace with an appropriate type. Also, set the paper size and type
correctly.
Available Paper(P. 675)
Loading Paper(P. 139)
Specifying Paper Size and Type(P. 155)
Do you print data without margins?
●
This symptom occurs if a margin is set to none in the printer driver. A margin of 1/4" (5 mm) or less
around the edge of paper or 3/8" (10 mm) or less around the edge of envelopes is not printable with the
machine. Make sure to have margins around the document to print.
[Finishing] tab [Advanced Settings] [Expand Print Region and Print] [Off]
Smudges Appear on Printouts
Are you using appropriate paper?
●
Check usable paper, and replace with appropriate paper.
Available Paper(P. 675)
Loading Paper(P. 139)
Troubleshooting
603