Canon imageCLASS D1650 All-in-One Monochrome Laser Printer - Manual (Page 238)

➠ The selected destination and the fax settings used at the time are specified. You can also change the
settings before sending.
To delete destinations
When you transmitted to multiple destinations, you can delete destinations as necessary.
1
Select <Confirm Destination>.
2
Select the check box for the destination to be deleted, and select <Remove from Dest.>.
● If you select the Group Dial check box, you can view the destinations registered in the group by
selecting <Details> <Destination>.
3
Select <Yes>.
6
Specify the scanning settings as necessary. Basic Operations for Sending
Faxes(P. 215)
7
Select <Start>.
● If the <Confirm Destination> screen is displayed, check whether the destination is correct, and then select
<Start Scanning>.
➠ Scanning of the original starts.
● If you want to cancel, select <Cancel> <Yes>. Canceling Sending Faxes(P. 223)
When placing originals in the feeder in step 1
When scanning is complete, the faxes are sent.
When placing originals on the platen glass in step 1
When scanning is complete, follow the procedure below.
1
Select the original size.
● When there is only one page to be scanned, proceed to step 3.
2
Place the next original on the platen glass, and select <Scan Next>.
● Repeat this step until you finish scanning all of the pages.
Faxing
230