Canon imageCLASS D1650 All-in-One Monochrome Laser Printer - Manual (Page 340)

● Entering the printer name makes it easier to identify multiple printers that support AirPrint.
◼ Changing the Setting of Functions Available with AirPrint
If you want to disable functions that you are not going to use with AirPrint or encrypt communications, configure the
necessary setting using the operation panel.
Changing Print and Fax Settings
To perform printing or fax sending with AirPrint, IPP protocol is used.
Turning the Function On/Off
You can specify whether to perform printing and fax sending with AirPrint. The factory default setting is <On>.
<Menu> <Preferences> <Network> <TCP/IP Settings> <IPP Print Settings> Set <Use
IPP Printing> to <Off> or <On> <Apply>
Changing the TLS Setting
You can specify whether to encrypt communications using TLS when performing printing or sending faxes with
AirPrint. The factory default setting is <Off>.
<Menu> <Preferences> <Network> <TCP/IP Settings> <IPP Print Settings> Set <Use
TLS> to <Off> or <On> <Apply>
Changing the Scan Setting
Configure the scan setting using AirPrint.
Set the Function to Enable or Disable
You can turn on/off the scan function available with AirPrint. The factory default setting is <On>.
<Menu> <Preferences> <Network> <TCP/IP Settings> <Network Link Scan Settings>
Set <Use Network Link Scan> to <Off> or <On> <Apply>
Change TLS Settings
You can specify whether or not to encrypt TLS communications when scanning data using AirPrint. The factory
default setting is <Off>.
<Menu> <Preferences> <Network> <TCP/IP Settings> <Network Link Scan Settings>
Set <Use TLS> to <Off> or <On> <Apply>
Linking with Mobile Devices
332