Canon imageCLASS D1650 All-in-One Monochrome Laser Printer User Manual
Page 582
8
Gently close the feeder.
9
Select <Start Scanning>.
➠
The adjustment image is scanned and adjustment starts.
10
When a message appears notifying that adjustment is complete, open the feeder,
and remove the adjustment image.
11
Gently close the feeder.
If the <Could not perform correction.> message is displayed
●
Did you load the paper displayed in step 4 into the paper source?
●
Did you place the adjustment image printed paper on the platen glass with the print side facing down and
with the thin black line on the left?
●
Has a paper jam occurred? Clearing Paper Jams(P. 642)
●
Is the amount remaining in toner cartridge sufficient? If the amount remaining in the toner cartridge is low,
it is recommended that you replace the toner cartridge. Checking the Remaining Amount of
Consumables(P. 569)
Maintenance
574