Afterimages appear in blank, Areas(p. 605), Afterimages appear in blank areas – Canon imageCLASS D1650 All-in-One Monochrome Laser Printer User Manual
Page 613
Afterimages Appear in Blank Areas
Are you using appropriate paper?
●
Check usable paper, and replace with appropriate paper.
Available Paper(P. 675)
Loading Paper(P. 139)
Do afterimages appear when you print on large size paper after printing on
small size paper?
●
Change the setting for <Reduce Ghosting 1>. Setting to <On> may solve the problem.
●
If you set to <On>, the printing speed may be slower.
Do ghost images appear in the same page?
●
Change the setting for <High Humidity Mode>. Setting to <On> may solve the problem.
●
If you set to <On>, the print density may vary depending on the ambient humidity.
Is the amount remaining in toner cartridge running low?
●
Check how much the amount remaining in toner cartridges is left, and replace the toner cartridges as
necessary.
●
Regardless of the displayed toner level, the toner cartridge may have reached the end of its lifetime due to
the machine's environmental conditions and the deteriorated materials in the cartridge. Replace the toner
cartridge.
Replacing the Toner Cartridge(P. 566)
Troubleshooting
605