Canon imageCLASS D1650 All-in-One Monochrome Laser Printer - Manual (Page 477)

<Menu> <Preferences> <Network> <SNMP Settings> Select <Off> or <On> in <Format
Host Rsrcs. MIB to RFC2790> <Apply> <OK> Restart the machine
<Use Dedicated Port>
Enable or disable the dedicated port. The dedicated port is used when printing, faxing, or scanning uses MF Scan
Utility and when browsing or specifying the machine settings over the network.
<Off>
<On>
<Menu> <Preferences> <Network> <Use Dedicated Port> Select <Off> or <On>
<OK> Restart the machine
<Dedicated Port Auth. Method>
Specify whether to limit the authentication method specifically to the secure one when using the dedicated port. If
<Mode 2> is selected, the authentication method is limited specifically to the secure one.
<Mode 1>
<Mode 2>
<Menu> <Preferences> <Network> <Dedicated Port Auth. Method> Select <Mode 1> or
<Mode 2>
● If <Mode 2> is selected, you cannot establish a connection from the device management software or driver
in some cases.
<Wait Time for Conn. at Startup>
Specify a wait time for connecting to a network. Select the setting depending on the network environment. Setting a
Wait Time for Connecting to a Network(P. 56)
0 to 300 (sec.)
Setting Menu List
469