Canon imageCLASS D1650 All-in-One Monochrome Laser Printer - Manual (Page 580)

Adjusting Image Quality
3JX3-09U
If the print results or scanned images are not satisfactory such as low image quality, poor reproducibility, or skewed
printouts, try the adjustments below.
◼ Adjust Copy Image
If the density or brightness of copies and memory media print differs markedly from the originals, use this function so
that the appearance of the printing results becomes closer to that of the originals. Adjusting the Gradation and
Density for Copy Jobs(P. 573)
◼ Black Text Processing for Color
You can make an adjustment such that black or nearly black text is reproduced in a color closely matching with the
original that was scanned in color. Adjusting Values for Text Color Reproducibility(P. 575)
◼ Density Adjustment
When the print results are too dark or too light, you can adjust the density. Adjusting Print Density(P. 577)
◼ Adjust Print Position
You can adjust the print position when the printed image is skewed or part of the image is outside the print range.
Adjusting Print Position(P. 578)
Maintenance
572