Grass Valley Kayak HD v.6.9.3 - Manual (Page 103)

Kayak — User Manual 103
Transition Control
Pressing one of the flashing buttons delegates the Effects keypad to that
transition rate and its current rate appears on the readout. A time entry is
then expected on the keypad in seconds, frames, field format.
Other Transition Control Interactions
The Transition Lever Arm can be used in combination with the Auto Trans or
Cut button to perform a main transition. For example, you can start the
transition
by moving the lever off its limit, and finish the transition by pressing Auto
Trans . Moving the lever part way, then pressing Cut will complete the transi-
tion with a cut. The lever arm will be resynced by recalculating the resting
lever arm way to complete the transition in the direction of the arrow.
Moving the lever arm in the opposite direction allows to resync the arm to
an end position without affecting the output signal.