Grass Valley Kayak HD v.6.9.3 - Manual (Page 188)

188 Kayak — User Manual
Section 5 — Kayak Menu Summaries
Examples:
• Serial: PP to ME3 to ME2
ME3 is coupled to P/P
ME2 is coupled to ME3
ME1 is not coupled
• Parallel: PP to ME3; PP to ME2
Both, ME3 and ME2 are coupled to PP. ME1 is not coupled.
• Combined: PP to ME3; PP to ME2
Both, ME3 and ME2 are coupled to P/P.
ME2 to M/E1
ME1 is coupled to ME2
Note Recursion is not possible. PP to ME3; ME3 to PP is not allowed.
Each ME can be used as Master M/E. If a coupled M/E is modified directly
via a control unit the master ME is not affected.
Note When the Half M/E is coupled (for example DSK mode) the stage is not avail-
able for ME Couple.
Coupled Resources
After selection of the ME Couple Mode in the Config - E-Box menu, the fol-
lowing M/E resources can be coupled:
• PGM and PST bus (optionally by one substitution table) at ME crossbar.
• CUT, AUTO and FADER at ME transition.