Additional features in multimix mode, Restrictions – Grass Valley Kayak HD v.6.9.3 User Manual
Page 200
200
Kayak — User Manual
Section 5 — Kayak Menu Summaries
Additional Features in MultiMix Mode
•
There are two new transition types: MISC 1 and MISC 2. Each can be
defined (SidePanel only) as DPM or RAM Recorder. UPKs can be used
to map MISC 1 and MISC 2 to the control panel. For example: MISC 1
can replace the Priority Transition button, then a DPM transition can be
run with MISC 1.
•
Key Wipe can also be assigned to a Transition subpanel button, typi-
cally the
Add
button, using the UPK panel assignment menu.
•
If a RAM Recorder clip is assigned to a MISC component, to see the clip
play at the proper speed during an Auto Transition, the Auto Transition
duration must be set to the number of frames in the clip from Mark In
to Mark Out.
•
For each component (BGND, KEY1,…, Misc) a different transition type
is selectable.
•
Dedicated keyer buttons
Cut
and
Mix
: The
Cut
and
Mix
buttons will now
perform the transition type selected for this keyer, not just
MIX
.
•
You can select/deselect a transition component while you are in the
middle of a transition. A deselected component will stay half way in
while the other components finish their transition.
•
Limit Set
/Limit On is supported now. The Limit Set/On function
offers the possibility to stop the transition before reaching 100%. On
control panels the related UPK buttons can be programmed with this
functionality. The buttons are also available on the SidePanel menu.
Refer to
Section 7-Sidepanel Menu Summaries
•
Offset Transition
is supported now. This provides the option to have
individual start and end times per component in relation to the total
transition time. The Offset Transition setup is only supported in the
SidePanel application. Refer to
•
A combination of Limit Set/On and Offset Transition is supported.
Restrictions
•
For a wipe transition in the keyers, the associated keyer wipe should be
used. Selecting the main wipe will force the BGND transition type to
main wipe as well.
•
Transition PVW does not show DPM transitions. The completed transi-
tion may be different due to the DPM effect on the Keys. During the
DPM transition, the effect will also appear on the PVW.
•
Limit Set for BlackPst is not supported.
•
In the current software the Offset transition times for PGM and PST
should be identical.