Grass Valley Kayak HD v.6.9.3 - Manual (Page 106)

106 Kayak — User Manual
Section 3 — Control Panels
Wipe pattern selection and other preset pattern adjustment such as softness
of the preset pattern edge and size of the preset pattern shape can be
adjusted in the Wipe menu. The Joystick in the Joystick subpanel, when
properly delegated, controls the location of the preset pattern on the screen.
The Preset Pattern and Masking features share common keyer hardware.
When a Preset Pattern is being used by a keyer, masking will be disabled
for that keyer.
Key Sources
Matte Fill
The Matte Fill button serves to select a color matte as a fill signal for the
respective key in place of the Fill bus signal.
Self/Couple Key Button / Split/Couple Key Button
When the Miscellaneous Bus is delegated to a keyer, a source selection
always selects the Fill signal for the corresponding keyer.
The Self/Couple and Split/Couple buttons define the way in which the key
signal is selected.
If Self/Couple Key is selected, the selected Fill signal is also used as key
signal.
If Split/Couple is active, a selection of the Fill signal does not change the
key signal. To select the Key signal, hold down the
Split/Couple button and
select the key source on the Miscellaneous Bus.
Note If you want to see in Split Key mode which source you have selected as key
source, press Split/Couple Key. The Key Buses row will indicate the source as
long as the button is held down.
If both of the two buttons are active, the selection is done in coupled key
mode.
In Coupled key selection mode, the operator selects a Key Fill source on the
Key Buses row and the switcher automatically selects the Key Source signal
using the Coupled Key table.
The Coupled Key table is defined in the menu.