Grass Valley Kayak HD v.6.9.3 - Manual (Page 81)

Kayak — User Manual 81
3-D Digital Effects Concepts
Continuity Control
The continuity adjustment determines the angle of the path into and out of
the keyframe. It is represented by a vector 90 degrees to the tension vector
(
Figure 50 ). The unmodified path shown is identical to the unmodified
path of the other controls.
Figure 50. Continuity Control Setting Zero
With continuity set to 1.0, the entry path through the keyframe is pulled
positively along the continuity vector. The effect of 1.0 continuity is that of
motion dropping into and then out of the keyframe, similar to a bouncing
ball (
Figure 50 on page 81 ).
Figure 51. Continuity Control Setting 1.0
Continuity = 0.0
KF1 KF2
KF3
0721_06_50_r0
+
–
Continuity
Vector
Continuity = 1.0
KF1
KF2
KF3
+
–
Continuity
Vector
0721_06_51_r0