Grass Valley Kayak HD v.6.9.3 - Manual (Page 133)

Kayak — User Manual 133
Effects Subpanel
Changing the Hold Time of a Snapshot or Keyframe
The following procedure is used:
1. Select Keyframe / Snapshot (button " and i).
2. Press HTM .
3. Enter hold time with numeric keypad.
4. Press Enter .
Note Errors can be deleted with Clear.
Changing the Transition Time of a Snapshot or Keyframe
The following procedure is used:
1. Select transition object.
2. Press TRTM .
3. Enter transition time with numeric keypad.
4. Press Enter .
Note Errors can be deleted with Clear.
Inserting a Loop in a Timeline
If a loop is inserted in the Effects subpanel always an endless loop (loop
counter = 000) is inserted for default. To change the loop counter follow the
steps under section Modifying A Loop.
Note It’s possible to insert loops (max. 99) into other loops. This functionality is
only available with the menu operation.
Entering a Loop During the Generation of a Timeline
The following procedure is used:
1. Enter last timeline object before the loop.
2. Press LOOP .
3. Enter first timeline object in the loop.
Note The loop end is before the next ELOOP or LOOP object or the end of the time-
line if no other loop follows. If the button LOOP is pressed before the end of
the loop, the ELOOP object is moved to that position in the timeline. If the
loop is an endless loop, the timeline ends with the end of the loop.