Dpm (digital picture manipulator), Key wipe, wipe1, wipe2, Axis lock buttons – Grass Valley Kayak HD v.6.9.3 User Manual
Page 115
Kayak — User Manual
115
Positioner Subpanel
DPM (Digital Picture Manipulator)
The
DPM
button can be combined with the delegation buttons
Key1 - 4
in the
Keyer Subpanel. To toggle through the different sets of parameters of an
corresponding DPM channel (Digital Picture Manipulator), just press the
DPM
button or the relative
Key delegation
button several times. Since there are
a lot of sets of parameters per DPM channel, it can be more efficient to use
the menu delegation to delegate a specific set of parameters.
Key Wipe, Wipe1, Wipe2
These
wipe generator
buttons can be combined with the delegation buttons
Key1-4 in the Keyer Subpanel and the
Wipe
button in the Transition Sub-
panel.
There are different location/size parameters per wipe generator for every
point of use. E.g.
Wipe1
can be used as background transition color wash
control for the background wipe border pattern key inhibit or force mask
color wash control for the keyer matte.
If you combine a
wipe generator
button with one of the other delegation but-
tons, the system checks whether there is a point of use for the corre-
sponding
wipe generator
. In this case the corresponding set of parameters is
delegated to the Positioner.
Pressing the
Keyer delegation
button (or the wipe transition button) repeat-
edly toggles through the different points of use of the
wipe generator
for the
selected delegation.
Pressing the
wipe generator
button repeatedly toggles through all points of
use of the delegated
wipe generator
.
Pressing down more than one delegation button at the same time delegates
the Positioner to control multiple objects simultaneously.
The display in the Positioner Subpanel always shows delegated set of
parameters and the point of use.
The Auto Delegation Function can be disabled by the
Delegate Lock
button.
Axis Lock Buttons
Activating the
X, Y,
and
Z
axis lock buttons individually or in any combina-
tion locks parameter changes for the selected axes. For example, if the
X
button is active while the Positioner is moved, then only
Y
and
Z
axis deflec-
tion can be performed. Axis locking also applies to centering functions.
The
Center
button is used to apply the default (center) value to the delegated
parameter.