Grass Valley Kayak HD v.6.9.3 User Manual
Page 282
282
Kayak — User Manual
Section 5 — Kayak Menu Summaries
The Output Recursive system has four modes that can be selected:
•
Trails
– Leaves a trail of old images or partials of images behind as you
move the image around the screen or create “wind” blown images.
Decay settings can be adjusted to resemble particles.
•
Freeze
– Allows you to capture a still image from moving video and
modify it. This provides freezing and strobes.
•
Montage
– Allows you to create a montage of still images from moving
video.
•
Motion Decay
– Causes motion in the image to leave a blurred remnant in
the area it has moved from.
Trails
After selecting
Trails
, a screen similar to the following will appear:
Figure 209. Output Recursive - Trails
Strobe Type
—sets the type of strobe effect that will cause the automatic
capture of a new image. Selecting the
Strobe Type
button displays the
Select
Strobe Type
mode button pane, as shown in
.