Grass Valley Kayak HD v.6.9.3 User Manual
Page 136
136
Kayak — User Manual
Section 3 — Control Panels
Off
: With Direct turned off press a number to preview the name of the reg-
ister before it is selected. Use
Trim / Enter
or
Eff Diss / Run
to select the register
shown in preview.
Lock / Learn
•
Learn
(unshifted) acts like
Store
, but saves the work buffer (current state)
into a register in the currently active bank.
1. EXAMPLES: Learn – 3
saves register 3, where x = the current bank. This
overwrites whatever was in register 3 before.
2. Learn + Undo / .
searched the next free register. Using the
Shift
() button
allows another bank to be selected.
3. Learn – Shift (·)– 2 – 3
saves register 23.
•
Lock (Shift + Lock)
locks the current register, preventing it from being
erased or edited. If you try to erase or edit the current register the word
“Locked” displays for 2 seconds. The Lock function acts as a toggle, so
if you press
Shift + Lock
a second time it unlocks the current register.
Eff Diss / Run
•
Run
recalls the pre-selected register (
Direct off
mode only).
Run
also acts as
a toggle for the Timeline
Run / Pause
button.
•
Eff Diss (Shift + Eff Diss)
causes a transition from the current work buffer
(state) to the selected register’s 1st keyframe (
Direct off
mode only). Not
implemented yet.
Eff Diss
performs the same as the
Auto/Abort
function
from XtenDD.
Get / Put
•
Put
copies the current register timeline information into a target register.
Pressing a numeric button assumes that the Put will be placed into the
current bank. Pressing a second number causes the 1st number to
become the bank, the 2nd number becomes the actual register. The
operation must be completed with the
Enter
button.
1. Put – 6 – 7– Enter:
Copy the current register into register 67.
2. Put – . – Enter
: Copy the current register into the next empty register.
•
Get
copies the contents of a target register into the current register – the
operational model is the same as that of the
Put
function.
•
Get – 6 – 7– Enter
: Copy register 67 into the current register.
•
Get – . – Enter
: Clear the current register.