Grass Valley Kayak HD v.6.9.3 - Manual (Page 284)

284 Kayak — User Manual
Section 5 — Kayak Menu Summaries
Star Decay —causes random pixels of the frozen image in the Output Recur-
sive to fade away over time.
Note Additive effect with Picture Decay.
Blur —sets the percentage of blur on the effect.
Strobe Timing
• Period defines the number of frames in a Strobe Cycle. Only available
when Strobe Type = TIME.
• On Time sets the percentage of the period that the image is unfrozen. The
default is 0.0% and is only available when Strobe Type = TIME.
Loop
• ON : routes the image into the recursive hardware
• OFF : stops the recursive effect and returns to live video.
Keyframe Reset—clears the image in the recursive loop.
• ON : resets that loop by creating a new frozen image at each keyframe
that has Keyframe Reset on.
• OFF : No keyframe reset.
Force Strobe —forces the strobe to turn on or off, depending on whether there
is motion in the transform. ON strobes regardless of the transform motion.
OFF forces strobes only if there is motion in the image transform.
Show Picture
• ON – (default) – displays the live video image in addition to the effect.
• OFF – displays only the effect without the live video image.
Trail Wind
Direction sets the direction of the wind and follows the same direction as
rotations:
• 1.00 is up or “North”,
• 1.25 is right or “East”,
• 1.5 is down or “South”,
• and 1.75 is left or “West”.
The defaults required for 4x3 and 16x9 (HD and SD) may vary.
Speed sets the speed that the wind blows the trails off of the screen.