Yaskawa MP930 - Manual (Page 109)

4.1 Part Names
4 -7
For details on the connection methods, see 4.3.5 Connecting the Devices.
IN1 OUT1 IN2 OUT2
A1 A1 A1 A1 B1 B1 B1 B1
J Station Number Switch
This switch sets the MECHATROLINK station number.
D Setting range: 1 to E
When multiple Units are connected, make sure the same station number is not used more than
once.
SW1
J I/O Indicator Switch
The I/O signal monitor displays can be switched in 32-point units.
IN1: Input signals 1 to 32
IN2: Input signals 33 to 64
OUT1: Output signals 1 to 32
OUT2: Output signals 33 to 64
SW2 IN1
IN2
OUT1
OUT2
J Field Wiring Terminals
The field wiring terminals supply 24-VDC to the I/O Unit.
Terminal Name Function Appearance
24 VDC +24 VDC
24 VDC
0 VDC 0 VDC
0 VDC
FG Protective ground terminal
4