3 operation from programming devices, 1 file manager – Yaskawa MP930 User Manual
Page 22
Advertising
MP930
1.3.1 File Manager
1 -10
1.3 Operation from Programming Devices
This section gives an overview of the types of operation that can be performed using peripheral
devices.
A computer running the CP-717 programming software for the ladder logic programs and motion
programs for the MP930 is called a “Programming Device.”
Communications with the Unit are enabled by connecting a Programming Device to the MEMO-
BUS port of the MP930 MC Unit using a special cable.
The following operations can be performed from the Programming Device.
1.3.1 File Manager
The following folder and file management functions and file transfer functions are performed.
D
File management
D
User management
D
File transfer
D
Online/offline
D
Logging off
D
CPU control
1
Advertising