Yaskawa MP930 - Manual (Page 9)

x
Using This Manual
J Intended Audience
This manual is intended for the following users.
D Those responsible for estimating the MP930 system
D Those responsible for deciding whether to apply the MP930 system
D Those responsible for designing the MP930 system so that it can be mounted in the control and
operating panels
D Those responsible for making, inspecting, testing, adjusting, and maintaining the control and op-
erating panels in which the MP930 is mounted
J Description of Technical Terms
In this manual, the following terms are defined as follows:
D PP = Programming Panel
D PC = Programmable Logic Controller
D “−− ” in “MOV [axis1]−−...” represents numeric data for axis 1.