Mounting procedure – Yaskawa MP930 User Manual
Page 131
Advertising
4.3 System Startup Methods
4 -29
Mounting Procedure
The mounting procedure is as follows:
1. Release the mounting clips.
Pull down the DIN track mounting clips to release them.
Clip
MP930
YASKAWA
JEPMC−MC350
2. Mount the Unit on the DIN track.
a)
Hook the MP930 Unit on the DIN track.
b)
Push the Unit inward at the bottom until the MP930 comes into contact with the mount-
ing surface.
a)
b)
When a DIN track with a 10-mm gap is used, mount spacers on the mounting surface.
DIN track (10-mm gap)
Spacers
4
Advertising