Yaskawa MP930 - Manual (Page 255)

Maintenance and Inspection
8.1.1 Daily Inspections
8 -2
8.1 Inspection Items
This section summarizes daily and regular inspection items that must be performed by the custom-
er.
8.1.1 Daily Inspections
The following table lists the daily inspection items.
Table 8.1 Daily Inspection Items
No. Inspection Item Inspection Details Criteria Action
1 Installation conditions
of Module, etc. Check the mounting
screws for looseness.
Check whether the
covers are all in place. The screws and cov-
ers must be secured
correctly. Retighten the screws.
2 Connection conditions Check the terminal
screws for looseness. The screws must be
tight. Retighten the screws.
Check the connectors
for looseness. The connectors must
be tight. Retighten the
connector set screws.
Check the gap be-
tween crimp termi-
nals. There must be an ap-
propriate gap between
the terminals. Correct as necessary.
8