Yaskawa MP930 User Manual
Page 147
Advertising
4.3 System Startup Methods
4 -45
c)
Allocate JEPMC-IO300 to ST#03.
Press the down arrow to the right of the ST#03 TYPE, and click JEPMC-IO300.
d)
Set the I/O address and scan.
Set the JEPMC-IO300 input address, output address, and scan.
• Double-click the INPUT area, and then set IW and 10.
• Double-click the OUTPUT area, and then set IW and 20.
• Click the down arrow to the right of SCAN, and click High.
This completes the settings.
4
Advertising