Yaskawa MP930 User Manual
Page 130
Advertising
System Startup
4.3.4 Mounting the Units
4 -28
J
Mounting to DIN Track
Before Mounting on the DIN Track
As shown in the following illustration, there are various types of DIN track, depending on the
gap from the mounting surface.
Gap from mounting surface: 7.0 mm
10.0 mm
Mounting panel
DIN track
7.0 mm
10.0 mm
D
Mounting the MP930 Units on DIN Track with a 10-mm Gap
To protect the MP930 from vibration, mount spacers at the bottom rear of the MP930, as
shown in the illustration. The mounting parts, such as spacers, are sold separately.
Spacers
Parts required for mounting the Unit on the DIN track are sold separately, and are not provided with the Unit.
Purchase the following part:
S
Model: JEPMC-OP300
4
IMPORTANT
Advertising