Yaskawa MP930 - Manual (Page 63)

Basic System Operation
3.2.1 DIP Switch Settings
3 -4
Memory Initialization
When the DIP switch is set according to the following procedure and the power is turned ON
or OFF, memory will be initialized, and the user programs and definition data will be deleted.
1 2 3 4 5
Turn OFF the
MP930 power. Turn ON DIP
switch pins 3 and
4.
ON
12
3
4
5
6
→
Turn ON the pow-
er, and check that
the RDY and
RUN indicators
flash (about 3 se-
conds). Turn OFF the
power, and return
the DIP switch
pins to their origi-
nal settings.
ON
12
3
4
5
6
→
Turn ON the pow-
er again.
Always execute memory initialization if you remove the battery when the Module power sup-
ply is turned OFF.
3