Yaskawa MP930 - Manual (Page 31)

MP930 Specifications and System Configuration
2.1.3 Function Lists
2 -6
Item Specifications
Scanning Two scan levels: High-speed scan and low-speed scan
High-speed scan time setting:2 to 32 ms (2 ms units)
Low-speed scan time setting: 2 to 300 ms (0.1 ms units)
User Drawings and
Functions
Motion Programs Start drawings (DWG.A): 64 drawings max. Up to three hierarchical drawing levels
High-speed scan process drawings (DWG.H): 100 drawings max. Up to three hierarchical drawing levels
Low-speed scan process drawings (DWG.L): 100 drawings max. Up to three hierarchical drawing levels
Number of steps:
Up to 500 steps per drawing
User functions: Up to 200 functions
Motion programs: Up to 256
Revision history of drawings and motion programs
Security function for drawings and motion programs
Data Memory Common data (M) registers: 32 Kwords
System (S) registers: 1 Kwords
Drawing local (D) registers: Up to 16 Kwords per drawing
Drawing constant (#) registers: Up to 16 Kwords per drawing
Input (I) registers:
2 Kwords (including internal input registers)
Output (O) registers: 2 Kwords (including internal output registers)
Constant (C) registers: 4 Kwords
Trace Memory Data trace: 128 Kwords (32 Kwords × 4 groups), 16 points defined
Failure trace: 32 Kwords, 500 items defined
Memory Backup User memory: CMOS battery backup
Data Types Bit (relay): ON/OFF
Integer: − 32768 to +32767
Double integer: −2147483648 to +2147483647
Real number: ± (1.175E − 38 to 3.402E + 38)
Register
Designation
Method Register number: Direct designation of register number
Symbolic designation: Up to 8 alphanumeric characters (up to 200 symbols per drawing)
With automatic number or symbol assignment
Instructions Program control instructions: 14 instructions
Direct I/O instructions: 2 instructions
Relay circuit instructions: 14 instructions (including set and reset coils)
Logic operation instructions: 3 instructions
Numeric operation instructions: 16 instructions
Numeric conversion instructions: 9 instructions
Numeric comparison instructions: 7 instructions
Data manipulation instructions: 14 instructions
Basic function instructions: 10 instructions
Table data manipulation instructions: 11 instructions
DDC instructions:
13 instructions
System functions: 14 instructions
2