8 creating and saving motion programs – Yaskawa MP930 User Manual
Page 158
Advertising
System Startup
4.3.8 Creating and Saving Motion Programs
4 -56
6. After completing the settings, click File (F) → Save (S) from the File menu.
7. Click the Yes button. The Servopack parameters will be saved.
4.3.8 Creating and Saving Motion Programs
Creating Motion Programs
Use the following procedure to create a motion program.
1. Click Refresh (R) from View (V) on the File Manager menu. This refreshes the display
information in the XY-TABLE folder.
4
Advertising