Yaskawa MP930 - Manual (Page 133)

4.3 System Startup Methods
4 -31
J Local I/O Connector Wiring
The following illustration shows the method of connecting the external I/O signals and the MC
Unit local I/O connector.
MP930 Unit
I/O cable
External I/O signals
(IN: 16 points, OUT: 16 points)
When connecting the external I/O signals and the MC Unit local I/O connector, use the follow-
ing cables.
Table 4.3 I/O Cable Models
Cable Length Model
0.5 m JEPMC-W5410-05
1 m JEPMC-W5410-10
3 m JEPMC-W5410-30
See MC Unit I/O Cables in 4.2.4 Connector Pin Layout and I/O Circuits for the pin layout of the cables between
the MC Unit I/O connectors and the external I/O signal lines.
4
INFO