Efficient Networks Siemens Sinamics S120 User Manual
Page 386
Communication PROFIBUS DP/PROFINET IO
10.1 Communications according to PROFIdrive
Drive Functions
386
Function Manual, (FH1), 07/2007 Edition, 6SL3097-2AB00-0BP4
Bit
Meaning
Remarks
BICO
1
Digital input/output 9
(DI/DO 9)
– DI/DO 9 on the Control Unit must be parameterized as an output
(p0728.9 = 1).
BI: p0739
2
Digital input/output 10
(DI/DO 10)
– DI/DO 10 on the Control Unit must be parameterized as an output
(p0728.10 = 1).
BI: p0740
3
Digital input/output 11
(DI/DO 11)
– DI/DO 11 on the Control Unit must be parameterized as an output
(p0728.11 = 1).
BI: p0741
4
Digital input/output 12
(DI/DO 12)
– DI/DO 12 on the Control Unit must be parameterized as an output
(p0728.12 = 1).
BI: p0742
5
Digital input/output 13
(DI/DO 13)
– DI/DO 13 on the Control Unit must be parameterized as an output
(p0728.13 = 1).
BI: p0743
6
Digital input/output 14
(DI/DO 14)
– DI/DO 14 on the Control Unit must be parameterized as an output
(p0728.14 = 1).
BI: p0744
7
Digital input/output 15
(DI/DO 15)
– DI/DO 15 on the Control Unit must be parameterized as an output
(p0728.15 = 1).
BI: p0745
8...
15
Reserved
– –
–
Note:
The bidirectional digital inputs/outputs (DI/DO) can be connected as either an input or an output (see also transmit signal
E_DIGITAL).
MT_STW
Control word for the "central probe" function. Display via r0685.
Table 10-23 Description of MT_STW (control word for Control Unit)
Bit
Meaning
Remarks
BICO
0
Falling edge probe 1
–
1
Falling edge probe 2
–
2
Falling edge probe 3
–
3
Falling edge probe 4
–
4
Falling edge probe 5
–
5
Falling edge probe 6
–
Activation of measuring time determination with the next falling
edge
For telegram 392, in addition, probes 3 and 6
6...7 Reserved
– –
8
Rising edge probe 1
–
9
Rising edge probe 2
–
10 Rising edge probe 3
–
11 Rising edge probe 4
–
12 Rising edge probe 5
–
13 Rising edge probe 6
–
Activation of measuring time determination with the next rising edge
For telegram 392, in addition, probes 3 and 6
14...
15
Reserved
– –
CI: p0682
CU_ZSW (status word for Control Unit, CU)
See function diagram [2458]