Efficient Networks Siemens Sinamics S120 - Manual (Page 475)

Basic information about the drive system
12.2 Data sets
Drive Functions
Function Manual, (FH1), 07/2007 Edition, 6SL3097-2AB00-0BP4
475
Note
In STARTER, you can copy the drive data sets (Drive -> Configuration -> "Drive data sets"
tab page).
You can select the displayed drive data set in the relevant STARTER screens.
Copying the motor data set
Set parameter p0139 as follows:
1. p0139[0] = Number of the motor data set that is to be copied (source)
2. p0139[1] = Number of the motor data set which should be copied into (target)
3. p0139[2] = 1
Start copying.
Copying has been completed, if p0139[2] = 0.
Note
In STARTER, you can set the drive data sets via the drive configuration.
12.2.5 Integration
Function diagrams (see SINAMICS S List Manual)
● 8560 Command Data Sets (CDS)
● 8565 Drive Data Sets (DDS)
● 8570 Encoder data sets (EDS)
● 8575 Motor Data Sets (MDS)
Overview of key parameters (see SINAMICS S List Manual)
Adjustable parameters
● p0120 Power unit data sets (PDS) number
● p0130 Motor data sets (MDS) number
● p0139 Copy motor data set (MDS)
● p0140 Encoder data sets (EDS) number
● p0170 Command data set (CDS) number
● p0180 Drive data sets (DDS) number
● p0186 Motor data set (MDS) number