Efficient Networks Siemens Sinamics S120 - Manual (Page 410)

Communication PROFIBUS DP/PROFINET IO
10.2 Communication via PROFIBUS DP
Drive Functions
410
Function Manual, (FH1), 07/2007 Edition, 6SL3097-2AB00-0BP4
The axis separator separates the objects in the telegram as follows:
• Slot 4 and 5: Object 1 ––> Active Infeed (A_INF)
• Slot 7 and 8: Object 2 ––> SERVO 1
• Slot 10 and 11: Object 3 ––> SERVO 2
etc.
10.2.2 Commissioning PROFIBUS
10.2.2.1 General information about commissioning
Interfaces and diagnostic LED
A PROFIBUS interface with LEDs and address switches is available as standard on the
Control Unit.
352),%86
LQWHUIDFH
352),%86
GLDJQRVWLFV/(''3
352),%86
DGGUHVVVZLWFKHV
&RQW
URO8QLW
Figure 10-25 Interfaces and diagnostic LED
● PROFIBUS interface
The PROFIBUS interface is described in the following documentation: