NORD Drivesystems BU0200 - Manual (Page 170)

6 Parameterisation
BU 0200 GB-4411 Subject to technical alterations 169
Parameter
{Factory setting}
Set value / Description / Note Device Supervisor Parameter set
P000 [-01]
...
[-04]
Operating para. disp.
(Operating parameter display)
SK 205E S P
0.01 ... 9999
{ 0 }
In the display of the SimpleBox (SK CSX-0) or the ControlBox (SK TU3-CTR, the operating
value selected in parameter P001 is displayed online.
Information about the operating status of the drive can be read out as required.
Exampl
e il
lustr
atio
n
Availability of the parameters
Due to certain configurations, the parameters are subject to certain conditions. The following tables
(from Section 6.1 onwards) list all parameters together with the relevant information.
Array parameter display
Some parameters have the option of displaying settings and views in several levels (arrays). After the
parameter is selected, the array level is displayed and must then also be selected.
If the SimpleBox SK CSX-3H is used, the array level is shown by _ - 0 1 . With the ParameterBox
SK PAR-3H (picture on right) the selection options for the array level appear at the top right of the display.
SimpleBox SK CSX-3H
P_ 0 1 P50 2
P_ 0 2
OFF
OFF
Setting:
Value of master function 1
Setting:
Value of master function 2
ENTER ENTER
ENTER
VALUE
ParameterBox SK PAR-3H
Parameters dependant on parameter set (P)
Selection in P100
Parameter number
Supervisor parameters (S)
Depend on the setting in P003
Array value
Parameter value range
Factory settings of parameter
Only available with types ≥ SK 2xxE
Description
Parameter text
Top: P-Box display
Bottom: Meaning