NORD Drivesystems BU0200 - Manual (Page 175)

SK 200E Manual for frequency inverters
174 Subject to technical alterations BU 0200 GB-4411
Parameter
{Factory setting}
Setting value / Description / Note Device Supervisor
Parameter
set
P002
Display factor
(Display factor)
S
0.01 ... 999.99
{ 1.00 }
The selected operating value in parameter P001 >Select of display< is multiplied with the
scaling factor in P000 and displayed in >Operating parameter display<.
It is therefore possible to display system-specific operating such as e.g. the throughput quantity
P003 Supervisor-Code
(Supervisor code)
0 ... 9999
{ 1 }
0 = All parameters are visible except for the Supervisor parameters and the group P3xx/
P6xx
1 = All parameters are visible except for the group P3xx and P6xx.
2 = All parameters are visible except for the group P6xx.
3 = All parameters are visible.
4 = ... 9999, (except 65) only parameters P001 and P003 are visible.