NORD Drivesystems BU0200 - Manual (Page 263)

SK 200E Manual for frequency inverters
262 Subject to technical alterations BU 0200 GB-4411
Display in the
SimpleBox
Error
Text in the Parameter Box
Cause
Remedy
Group Details in
P700[-01] /
P701
E008 8.0 Parameter lost
(EEPROM - Maximum value
exceeded) Error in EEPROM data
Software version of the stored data set not compatible with
the software version of the FI.
NOTE: Faulty parameters are automatically reloaded
(factory setting).
EMC interferences (see also E020)
8.1 Inverter ID error EEPROM faulty
8.2 External EEPROM error --
8.3 EEPROM KSE error
(Customer interface incorrectly
identified (customer‟s interface
equipment))
The upgrade level of the frequency inverter was not
correctly identified.
EEPROM with a firmware status of version 1.2 or above
plugged in to an FI with older firmware status
→ Loss of parameters! (See also note in Section 6)
Switch mains voltage off and on again.
8.4 EEPROM internal error
(Database version incorrect)
8.7 EEPROM copy differs
E009 --- reserved