NORD Drivesystems BU0200 - Manual (Page 246)

6 Parameterisation
BU 0200 GB-4411 Subject to technical alterations 245
Parameter
No. [Array]
Name
Factory
setting
Super
visor
Setting after commissioning
P 1 P 2 P 3 P 4
P402 [-04]
Adjustment: 0% [V]
Ext. analog input 2 2nd IOE
0.0 S
P402 [-05]
Adjustment: 0% [V]
reserved
0.0 S
P402 [-06]
Adjustment: 0% [V]
reserved
0.0 S
P403 [-01]
Adjustment: 100% [V]
Ext. analog input 1
10.0 S
P403 [-02]
Adjustment: 100% [V]
Ext. analog input 2
10.0 S
P403 [-03]
Adjustment: 100% [V]
Ext. analog input 1 2nd IOE
10.0 S
P403 [-04]
Adjustment: 100% [V]
Ext. analog input 2 2nd IOE
10.0 S
P403 [-05]
Adjustment: 100% [V]
reserved
0.0 S
P403 [-06]
Adjustment: 100% [V]
reserved
0.0 S
P404 [-01] reserved
P404 [-02] reserved
P410 (P) Min. freq. a-in 1/2 [Hz] 0.0
P411 (P) Max. freq. a-in 1/2 [Hz] 50.0
P412 (P) Setpoint, process ctrl. [V] 5.0 S
P413 (P) P-component PI control [%] 10.0 S
P414 (P) I-component PI control [%/s] 10.0 S
P415 (P) Process controller limit [%] 10.0 S
P416 (P) Ramp time PI setpoint. [s] 2.00 S
P417 [-01] (P)
Analog output offset [V]
first IOE
0.0 S
P417 [-02] (P)
Analog output offset [V]
second IOE
0.0 S
P418 [-01] (P)
Analog output function
first IOE
0 S
P418 [-02] (P)
Analog output function
second IOE
0 S
P419 [-01] (P)
Analog output scaling [%]
first IOE
100 S
P419 [-02] (P)
Analog output scaling [%]
second IOE
100 S
P420 [-01] Digital inputs (DIN 1) 1
P420 [-02] Digital inputs (DIN2) 2
P420 [-03] Digital inputs (DIN3) 4
P420 [-04] Digital inputs (DIN4) 5
P426 (P) Quick stop time [s] 0.10 S
P427 Quick stop on Error 0 S