NORD Drivesystems BU0200 - Manual (Page 312)

Technical Information / Datasheet
Documentation Supplement to B0200 DIP-Switch (S1), SK2xxE
1.1 corr. mistake at "Starting the copy function" 1414 Rck TI 800 000000008 GB
version reason for change(s) issue name document speech
Pos : 5 /T ec hnis che Inf or mationen/ Sons tige D okument e/ Ergänzung z um Handbuc h DI P-Schalt er CO PY [ SK xxE] @ 4\ mod_1393501058719_388.doc x @ 120697 @ 55 @ 1
Supplement to Manual
Subject:
DIP switches (S1) - Changes to function
Affected products and documents
Product Series Document Issue Section Page
SK 2xxE BU 0200 4411 5.2.2.2 151
Change
All devices of the SK 2xxE series are equipped with an 8-pole DIP switch. Via these DIP switches,
selected functions can be configured without the use of software to change parameters on the device.
Starting with firmware version 1.4 R2, the function of the DIP switch element S1-6 has been changed:
"Old" function
(up to firmware version 1.4 R1)
Position
DIP
"New" function
(from firmware version 1.4 R2)
U/F
control process
VFC control active 0 No function COPY
U/F characteristic curve active 1 EEPROM Copy function
active, once only
The device ID and firmware version can be obtained from the type plate.
Example: Frequency inverter type plate