NORD Drivesystems BU0200 - Manual (Page 70)

3 Options
BU 0200 GB-4411 Subject to technical alterations 69
Int. 24V mains unit 1~ 400V
SK CU4-24V-140-B
Part No. 275271109
Internal 24V mains unit for supply of the
SK 2x5E, with a mains voltage of
1~ 380-500V, -20/+10%.
500Ω burden resistor for
evaluation of 0/4-20mA
Electronic brake rectifier
SK CU4-MBR
Part. No. 275271010
This option enables the direct control of an
electromechanical holding brake by an SK 2x0E.
Supply:
24V=, ±20% and
200 … 275 V ~ or
380 … 500 V ~
Setpoint converter
SK CU4-REL
Part. No. 275271011
This option enables bipolar signals (±10VDC) to
be converted into
unipolar signals (0…10VDC). In
addition, two relays can be controlled by means
of digital signals.
Supply:
24V=, ±25%
2 x AIN (±10VDC)
2 x AOUT (0 … 10VDC)
2 x DIN, 2x relays ( ≤ 30VDC)
For all modules except SK CU4-POT: screw terminals, 16x 2.5mm
2
, AWG 26-14
* As an alternative to SK CU4-POT the connection extensions SK TIE4-SWT (direction selection switch,
Part No.: 275274701) and SK TIE4-POT (potentiometer, Part No.: 275274701) are also available.