NORD Drivesystems BU0200 User Manual
Page 40
Advertising
2 Assembly and installation
BU 0200 GB-4411
Subject to technical alterations
39
To replace the FI, proceed in the opposite sequence:
5. For sizes S 1 to 3 special attention must be paid to the correct contacting of the PE pins. These are
located diagonally in 2 corners of the FI and the connection unit.
6. The FI can only be placed on the SK T14 in one orientation.
7. Evenly tighten the Allen screws in a cross-wise direction.
Size 4: Handle or handle recess
Advertising