NORD Drivesystems BU0200 - Manual (Page 25)

SK 200E Manual for frequency inverters
24 Subject to technical alterations BU 0200 GB-4411
2.1.2 Adapters for Different Motors
In some cases, the terminal box attachments are different for different sizes of motor. Therefore, it may be
necessary to use an adapter to mount the frequency inverter.
In order to guarantee the maximum protection class IP55 / IP66 of the entire unit, motor must also have a
corresponding protection class.
NORD motor
sizes
Add-on
SK 2xxE Size 1
Add-on
SK 2xxE Size 2
Add-on
SK 2xxE Size 3
Add-on
SK 2xxE Size 4
Size 63 – 71 with adapter kit I Not possible Not possible Not possible
Size 80 – 112 Direct mounting Direct mounting with adapter kit II Not possible
Size 132 Not possible Not possible Direct mounting with adapter kit III
Size 160-180 Not possible Not possible Not possible Direct mounting
Overview of adapter kits
Name Add-on SK 2xxE Part No.
Adapter kit size 63-71 to KK80-112
(Adapter kit I)
Adapter plate, terminal box frame seal and screws 275119050
SK TI4-3 adapter kit_80-112
(Adapter kit II)
Adapter plate, terminal box frame seal and screws 275274321
SK TI4-4 adapter kit_132
(Adapter kit III)
Adapter plate, terminal box frame seal and screws 275274320
Adapter plate, Part No. 011015410
Seal, Part No. 13097000
Motor Size 71
Adapter unit SK TI4
Example
NOTE
The adaptability of motors from other manufacturers must be checked individually!
Information for the conversion of inverter-controlled drive units to the SK 2xxE can be found in
BU0320.