NORD Drivesystems BU0200 - Manual (Page 241)

SK 200E Manual for frequency inverters
240 Subject to technical alterations BU 0200 GB-4411
6.2.2 Information (I/O - extension)
Parameter Setting value / Description / Note Device Supervisor
Parameter
set
P170 ... [-01]
... [-02]
Present errors
(Present errors)
0 ... 9999 Actual fault present. Further details in Section 7 "Operating status messages".
… [-01 ] = Actual module fault
… [-02 ] = Last module fault
Possible displayed values:
1000 = EEPROM error
1030 = Systembus Bus Off
2000 = DIP changed
2001 = DIP configuration error / not permissible
2010 = Analog output error
2020 = Inverter does not support SK xU4-IOE (Error not associated with SK 2xxE possible)
P171 ... [-01]
...
... [-03]
Software version
(Software Version / Revision)
0.0 ... 9999.9 This parameter shows the software and revision numbers in the module. Array [-03] provides
information about any special versions of the hardware or software A zero stands for the
standard version.
… [-01] = Software Version 1, "Version number": (e.g.: V1.0)
… [-02] = Software Version 2, "Revision number": (e.g.: R1)
… [-03] = Software Version 3, "Special version": (e.g.: 0)
P172
Configuration
(Configuration level)
0 ... 2 This parameter displays the functions or variants integrated into the module.
1 = Internal bus module (SK CU4- …)
2 = External bus module (SK CU4- …)
3 = BUS Technology Unit via SPI