Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 110)

Publication 1758-UM002D-EN-P - October 2010
110 DataSite Flow Configuration Utility (DS FloConfig)
Open a Project File
Follow these steps to open an existing project file.
1. In the Start dialog box, click Open Project followed by OK.
The Open Project dialog box appears.
2. In the Directory box, enter the location of the desired project file.
Alternatively, use the tree structure to browse to the location.
3. Click Open.
The selected project file is open in the DS FloConfig window.
TIP
After the DS FloConfig window appears, you may also
open a project file by:
• choosing Open from the File menu, or
• clicking the Open button on the toolbar.