Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 226)

Publication 1758-UM002D-EN-P - October 2010
226 DataSite Flow Configuration Utility (DS FloConfig)
Delete a HART Scan Block
Follow these steps to delete a HART scan block.
1. Select the block you want to delete.
2. Click Delete.
A dialog box prompting you to confirm the deletion appears.
3. To confirm the deletion, click OK.
To cancel the deletion, click Cancel.
Copy a HART Scan Block
Follow these steps to copy a HART scan block.
1. Select the block you want to copy.
2. Click Copy.
Paste a HART Scan Block
Follow these steps to paste a HART scan block.
1. Select the block you want to copy and paste.