Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 80)

Publication 1758-UM002D-EN-P - October 2010
80 DataSite Configuration Settings Utility (DS Settings)
Configure an Alarm Event
Follow these steps to configure an alarm event.
1. Select the Alarm Enable check box.
Alarm events are enabled.
2. Select the check box for the date/time attribute you want to set.
3. For each check box you have selected in step 2, enter the date/time
value in the corresponding box.
The alarm event will be executed based on the frequency you set.
For example, if you set Month as 1, Day 20, Minute 3, and Second 5, the
alarm event will be executed annually at the third minute and fifth
second of every hour on January 20.
Configure a Calendar Event
Follow these steps to configure a calendar event.
1. Select the Calendar Enable check box.
Calendar events are enabled.
2. Select one of the options: Year, Month, Week.
The option you select determines how frequently the calendar event
routine will be executed.
• Year
Annually, on January 1, at 0 hours (midnight), 0 minutes, 0 seconds, a
corresponding calendar interruption task you have written in
DataSite Workbench is executed.
• Month
On the first day of every month at 0 hours (midnight), 0 minutes, 0
seconds, a corresponding calendar interruption task you have written
in DataSite Workbench is executed.
• Week
On the Monday of every week at 0 hours (midnight), 0 minutes, 0
seconds, a corresponding calendar interruption task you have written
in DataSite Workbench is executed.