Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 19)

Publication 1758-UM002D-EN-P - October 2010
DataSite Configuration Settings Utility (DS Settings) 19
3. If you have chosen TCP/IP Server, set up the parameters for the
TCP/IP connection.
Parameters for TCP/IP Communication
Parameter Description Default Value
Station number Station corresponding to the DataSite
controller communication Ethernet port. 1
IP address IP address corresponding to the Ethernet
communication port of the DataSite
controller. The address is in the format,
xxx.xxx.xxx.xxx, made up of four octets with
each octet ranging between 0 and 255. 192.168.100.75
Port no. Port corresponding to the DataSite
controller. 502