Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 234)

Publication 1758-UM002D-EN-P - October 2010
234 DataSite DNP3 Configuration Utility (DS DNP3)
• Data priority classification
Data objects can be classified according to priority. Requests can be
issued based on priority.
• Multi-connected equipment address
A communication network can have up to 4 master stations, with each
station being connected to up to 65,000 pieces of equipment, each with
a unique address. The actual configuration for each network depends on
the application.
• Time synchronization
Time-correcting commands are provided. With this, the slave station
can be corrected by the master station or initiate a time-correcting
command itself.
• Time label
Event information can have time labels.
• Broadcasting information
A site can send broadcasting information to other sites in the network.
• Data validation
The data link layer and the application layer can confirm communication
information.