Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 250)

Publication 1758-UM002D-EN-P - October 2010
250 DataSite DNP3 Configuration Utility (DS DNP3)
3. To edit the values in the Register, Event Val or Description fields, click
Modify and enter the new values. For example, if you want to change the
register address for a data point, click Modify and enter the new value in
the Modify dialog box that appears.
4. Click Modify to modify the signal type, data type, storage type and event
type for a record.
You can select a different option for each attribute from its pull-down
menu in the Modify dialog box.