Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 22)

Publication 1758-UM002D-EN-P - October 2010
22 DataSite Configuration Settings Utility (DS Settings)
Configure Serial Port Settings
Follow these steps to configure the serial port.
1. In the Serial Ports Settings box, double-click the row for the serial port
you want to configure.
The Serial Ports Settings dialog box appears.
2. Set up the parameters of the selected serial port.
TIP
You can also select another serial port from the COM
pull-down menu, and set up the parameters for that port.