Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 83)

Publication 1758-UM002D-EN-P - October 2010
DataSite Configuration Settings Utility (DS Settings) 83
Debug the Controller
Programs The Controller Debug function allows you to use test registers and retrieve
data from the DataSite controller for online or offline debugging of the user
programs you have written for the controller in DataSite Workbench.
Note that you can use this function to view a DataSite register value. Only
DataSite registers can be monitored. DataSite Workbench internal variables
cannot be monitored unless they are written into a DataSite register.
Open the Controller Debug Dialog Box
Follow this step to open the Controller Debug dialog box.
• From the Tools menu, choose Controller Debug.
The Controller Debug dialog box appears, and the file, Controller
Debug.rgf, located in the current project directory is displayed in the
project browser file pane.