Edit a register, Delete a register, Edit a register delete a register – Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 User Manual
Page 88
Publication 1758-UM002D-EN-P - October 2010
88 DataSite Configuration Settings Utility (DS Settings)
Edit a Register
Follow these steps to edit a register.
1.
In the Register Group box, select the group which contains the register
you want to edit.
2.
Select the register and click Edit Register. Alternatively, you can
double-click the register you want to edit.
The Edit dialog box appears.
3.
In the Value text box, enter the new value for the register.
4.
From the Type pull-down menu, select the corresponding data type for
the register address.
5.
Click OK.
The changes are saved.
Delete a Register
Follow these steps to delete a register.
1.
In the Register Group box, select the group which contains the register
you want to delete.
2.
Select the register and click Delete Register.
The register is deleted.
IMPORTANT
There is no Undo function for the Delete Register action.