Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 89)

Publication 1758-UM002D-EN-P - October 2010
DataSite Configuration Settings Utility (DS Settings) 89
Read the Controller-Run Parameters
Operational parameters for the DataSite controller include Battery Voltage,
Controller Temperature, System Status, and System Clock.
Follow this step to read these parameters from the controller.
1. Click Read.
2. To read these parameters continuously, select the Read Continue check
box.
These parameters can be read by the application programs written using
DataSite Workbench.
Controller Temperature
This is the internal temperature of the controller.
Battery Voltage
This is the battery voltage of the controller. When the battery voltage is lower
than 2.0V, you need to replace the battery.
System Status